LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 300 SRT-8 Core >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Removal >> 3.6L Dual Fan

3.6L Dual Fan

NOTE:

If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

  1. Disconnect negative battery cable.
  2. Remove the air filter housing assembly Refer to BODY, AIR CLEANER, REMOVAL .
    Fig 1: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the cooling fan electrical connector (1).
  4. Remove the cooling fan mounting bolts (2).
  5. Using care. Remove the radiator cooling fan assembly (3) from vehicle.
    Fig 2: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts
    GC0144322Courtesy of CHRYSLER GROUP, LLC
  6. Removing the fan motor wiring harness (5) from the fan shroud (6).
  7. Remove the fan blade (4) from the fan motor.
  8. Remove the bolts (2) that support the fan motor to the shroud.
scientia non olet · About LEMON Manuals