Sensor, Differential Pressure: Removal: Diesel

Fig 1: Differential Pressure Sensor Wire Harness Connector, Zip Tie, Differential Pressure Sensor Hoses, Nut & Differential Pressure Sensor

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
3. Disconnect the differential pressure sensor wire harness connector (1).
4. Remove the zip tie (5) securing the differential pressure sensor hoses (4).
5. Disconnect the differential pressure sensor hoses (4).
6. Remove nut (2) and the differential pressure sensor (3).