LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Removal >> 2.4L >> Coolant Adapter Mounted

Coolant Adapter Mounted

Fig 1: ECT Sensor & Coolant Adapter - Gas Engine
GC0120906Courtesy of CHRYSLER GROUP, LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor (1).
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor (1) by pressing the locking tab and twisting the sensor counter clockwise.
scientia non olet · About LEMON Manuals