Heater, Engine Block: Removal: 2.4L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Block Heater - 2.0L/2.4L

Courtesy of CHRYSLER GROUP, LLC

1 - BLOCK HEATER

2 - POWER CORD

Drain cooling system. Refer to STANDARD PROCEDURE .
Raise vehicle on hoist.
Detach power cord plug from block heater.
Loosen screw in center of heater. Remove block heater assembly.