LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> 3.6L - DTCS P0155 To P0455 >> Diagnosis And Testing >> P0158-O2 Sensor 2/2 Circuit High >> Set Condition

Set Condition

The Powertrain Control Module (PCM) detects that the Oxygen Sensor 2/2 voltage is greater than the maximum acceptable threshold for a specific amount of time, based on O2 Sensor heater temperature. The DTC will set as Pending after one trip and Active after two trips. Three good trips to turn off the MIL.