Column Mount

Place the shifter in PARK
Raise the vehicle.

Fig 1: Identifying Gearshift Cable, Eyelet & Manual Shift Lever
Courtesy of CHRYSLER GROUP, LLC
Remove the gearshift cable retaining clip (4) (if equipped).
Disconnect the gearshift cable (1) from the shift lever (3), and remove cable from bracket (2).
Lower the vehicle.
Remove the instrument panel side trim.
Remove the knee bolster fasteners, and the knee bolster.
If equipped, disconnect the trunk release harness connector from the trunk release switch on the knee bolster.

Fig 2: Instrument Panel Steering Column Cover Reinforcement & Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (3), and the instrument panel steering column cover reinforcement (1).

Fig 3: Identifying Silencer Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the silencer panel fasteners and silencer panel (1).

Fig 4: Identifying Shift Cable, Ball Stud & C-Clip
Courtesy of CHRYSLER GROUP, LLC
Disconnect the shift cable (3) from the ball stud (2).
Disconnect the shift cable (3) from to cable bracket.

Fig 5: Identifying Shifter Cable Routing
Courtesy of CHRYSLER GROUP, LLC
Remove the shifter cable grommet (3) from the opening in the dash panel (4), and remove the shifter cable.