LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2013 >> 200 S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission) >> DTC Troubleshooting >> P1790-Fault Immediately After Shift >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.
  1. FAULT AFTER SHIFT 
    1. This DTC is set along with a Gear Ratio DTC. Perform the appropriate test for the Gear Ratio DTC stored.
      NOTE:

      Check pending DTCs or 1 trip failures if there are no Active or Stored Gear Ratio DTCs.

      .

      Repair 

      • Refer to the DTC INDEX article and perform the appropriate diagnostic procedure.