LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2013 >> 200 S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission) >> DTC Troubleshooting >> P0890-Switched Battery >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

A fault is set if the sensed voltage on any of the pressure switch circuits is greater than 4.5 volts for the period of 7 msec before a request by the Transmission Control System requests the Transmission Control Output circuit to be energized. The transmission is placed in Limp-In and the MIL is illuminated after 10 seconds of vehicle operation.

scientia non olet · About LEMON Manuals