LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2013 >> 200 S, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Final Drive Control >> Installation >> Installation

Module, Final Drive Control: Installation: Installation

  1. Install ECC module into mounting studs.
  2. Install mounting nuts and tighten to 8N.m (71 in. lbs.) torque.
  3. Install the electrical connector.
  4. Install the left front trim panel.
scientia non olet · About LEMON Manuals