LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2013 >> 200 Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Switch, Ignition >> Removal >> Removal

Switch, Ignition: Removal: Removal

Fig 1: SKREEM Positioning
GC0121143Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. To remove the ignition switch, follow the procedure to remove the Sentry Key Immobilizer (SKREEM) module. Refer to MODULE, SENTRY KEY IMMOBILIZER (SKREEM), REMOVAL .
  3. If required, remove the SKREEM module (3) from the ignition key cylinder (2).
  4. If required, remove the ignition switch (1) from the ignition key cylinder (2).
scientia non olet · About LEMON Manuals