Module, Powertrain Control: Removal: Diesel

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Remove the engine cover (1).
   Fig 2: Removing/Installing Cowl Panel

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the wiper arm linkage. Refer to LINKAGE, WIPER ARM, REMOVAL .
4. Remove bolts and the strut support brace (6).
   Fig 3: Powertrain Control Module (PCM) Connectors

   Courtesy of CHRYSLER GROUP, LLC
5. Disconnect the Powertrain Control Module (PCM) wire harness connector (1).
   Fig 4: Crash Sensor Wire Harness Connector & Bolt

   Courtesy of CHRYSLER GROUP, LLC
6. Remove the crash sensor wire harness connector (1) from inner fender.
7. Remove bolt (2) and the PCM with mounting bracket.
   Fig 5: Nuts, PCM & Mounting Bracket

   Courtesy of CHRYSLER GROUP, LLC
8. Remove nuts (2) and the PCM (3) from mounting bracket (1).