Column Mount

Place the shifter in PARK
Raise the vehicle.

Fig 1: Identifying Gearshift Cable, Eyelet & Manual Shift Lever
Courtesy of CHRYSLER GROUP, LLC
Remove the gearshift cable retaining clip (4) (if equipped).
Disconnect the gearshift cable (1) from the shift lever (3), and remove cable from bracket (2).
Lower the vehicle.
Remove the instrument panel side trim.
Remove the knee bolster fasteners, and the knee bolster.
If equipped, disconnect the trunk release harness connector from the trunk release switch on the knee bolster.

Fig 2: Reinforcement I/P Steering Column
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (3), and the instrument panel steering column cover reinforcement (1).

Fig 3: Identifying Silencer Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the silencer panel fasteners and silencer panel (1).

Fig 4: Tie Strap To Secure Shift Cable To Shift Bracket
Courtesy of CHRYSLER GROUP, LLC
If equipped, remove the tie strap (1) that secures the shift cable (3) to the shift bracket (2).

Fig 5: Shift Cable AT Column
Courtesy of CHRYSLER GROUP, LLC
Disconnect the shift cable (2) from the shift mechanism (1).
Disconnect the shift cable from to cable bracket (3).

Fig 6: Identifying Shifter Cable Routing
Courtesy of CHRYSLER GROUP, LLC
Remove the shifter cable grommet (3) from the opening in the dash panel (4), and remove the shifter cable.