Pedal, Accelerator: Installation: Installation

Fig 1: 3 Retaining Nuts & Pedal Assembly

Courtesy of CHRYSLER GROUP, LLC

1. Position the pedal assembly (1) to the mounting studs.
2. Install the pedal assembly 3 retaining nuts (2, 3) and tighten to 34 N.m (25 ft. lbs.).
   Fig 2: Accelerator Pedal Adjuster Motor & Electrical Connectors

   Courtesy of CHRYSLER GROUP, LLC
3. Connect both electrical connectors at the APPS (2).
4. Connect the electrical connector at the accelerator pedal adjuster motor (1).
   Fig 3: Negative Battery Cable

   Courtesy of CHRYSLER GROUP, LLC
5. Connect the negative battery cable (1).
   Fig 4: Cable Attachment To Accelerator Module

   Courtesy of CHRYSLER GROUP, LLC
6. If equipped with adjustable pedals, synchronize the accelerator pedal to the brake pedal and then connect the adjuster cable (1) to the accelerator pedal adjuster motor (2). Refer to PEDAL(S), BRAKE AND/OR ACCELERATOR, INSTALLATION or PEDAL(S), BRAKE AND/OR ACCELERATOR, ADJUSTABLE, INSTALLATION .