LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Installation >> Orc Jumper Harness

Orc Jumper Harness

Fig 1: Removing/Installing ORC Jumper Harness
GC0122056Courtesy of CHRYSLER GROUP, LLC
  1. Connect the ORC jumper harness (2) to the body harness (3).
  2. Connect the ORC jumper harness connector (4) to the ORC (1).
  3. Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
WARNING:

Do not connect the battery negative cable. Refer to DIAGNOSIS AND TESTING . Serious or fatal injury may result if the system test is not performed first.

scientia non olet · About LEMON Manuals