Rail, Fuel: Installation: 2.4L

Fig 1: Fuel Injector & Rail

Courtesy of CHRYSLER GROUP, LLC

Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
Install the fuel injectors to the fuel rail.
Install injector into cup of fuel rail.
Install retaining clip and check to ensure injector is properly captured.

Fig 2: Fuel Rail
Courtesy of CHRYSLER GROUP, LLC

Fuel rail assembly.

Fig 3: Fuel Rail & Injectors
Courtesy of CHRYSLER GROUP, LLC
Insert the fuel injector nozzles into openings in the intake manifold. Seat the injectors in place.

Fig 4: Injector Electrical Harness
Courtesy of CHRYSLER GROUP, LLC
Install the two bolts to the fuel rail. Tighten fuel rail bolts to 27 N.m (20 ft. lbs.).

Fig 5: Harness Clips
Courtesy of CHRYSLER GROUP, LLC
Install the wiring harness to the fuel rail.

Fig 6: Fuel Injector Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Connect and lock the electrical connectors to the fuel injectors.

Fig 7: Fuel Line At Fuel Rail
Courtesy of CHRYSLER GROUP, LLC
Connect the fuel line to the fuel rail. Refer to STANDARD PROCEDURE - QUICK-CONNECT FITTINGS .
Install the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
Use the Scan Tool Fuel System Test to pressurize the fuel system. Check for leaks.