LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 Limited, 2D Convertible >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Removal >> Removal

Link, Stabilizer Bar: Removal: Removal

NOTE:

Before proceeding. Refer to FRONT, WARNING .

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 1: Tire & Wheel Mounting
    GC0082325Courtesy of CHRYSLER GROUP, LLC
  2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
    Fig 2: Strut Mounting To Knuckle
    GC0082326Courtesy of CHRYSLER GROUP, LLC
  3. While holding the stabilizer bar link (1) stud stationary, remove the nut (4) securing the link to the strut (3).
    Fig 3: View Of Stabilizer Link Mounting To Bar
    GC0120772Courtesy of CHRYSLER GROUP, LLC
  4. While holding the stabilizer bar link (1) lower stud stationary, remove the nut (3) securing the link to the stabilizer bar (2).
  5. Remove the stabilizer bar link (1).
scientia non olet · About LEMON Manuals