Steering System: Pump: Removal: Removal

Fig 1: Disconnecting/Connecting Battery Cables

Courtesy of CHRYSLER LLC

Disconnect and isolate battery negative cable (2) from battery post.
Raise and support vehicle. Refer to Hoisting, Standard Procedure .
Remove right front wheel mounting nuts, then tire and wheel assembly.
Remove right front wheelhouse splash shield. Refer to SHIELD, Splash, Front Wheelhouse, Removal .

Fig 2: Pressure Hose Retaining Bolt & (EHPS) Pump
Courtesy of CHRYSLER LLC
Siphon power steering fluid from pump reservoir (4).
Disconnect electrical connectors (1) from Electro Hydraulic Power Steering (EHPS) pump body (3).
Remove power steering pressure line bolt (2) and position the pressure line away from the EHPS pump.

Fig 3: EHPS Pump Bracket & Bolts
Courtesy of CHRYSLER LLC
Remove EHPS pump bracket (1) mounting bolts (2).

Fig 4: EHPS Pump Bracket Retaining Nut & EHPS Pump
Courtesy of CHRYSLER LLC
Remove EHPS pump bracket retaining nut (4) and remove the EHPS pump (1) from the vehicle.