LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> FAN, Cooling >> Removal >> 5.7L Dual Fan

5.7L Dual Fan

  1. Disconnect negative battery cable.
  2. Remove the air filter housing assembly Refer to BODY, Air Cleaner, Removal, 3.6L or BODY, Air Cleaner, Removal, 5.7L .
  3. Raise and support vehicle.
  4. If equipped, remove the lower closeout panel.
  5. Drain the coolant into a clean container. Refer to Standard Procedure .
  6. If equipped, install the lower closeout panel.
  7. Lower vehicle.
    Fig 1: Upper Radiator Hose
    GC0144930Courtesy of CHRYSLER LLC
  8. Remove the upper radiator hose (2).
    Fig 2: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
    GC0144533Courtesy of CHRYSLER LLC
  9. Disconnect the cooling fan electrical connector (1).
  10. Remove the cooling fan mounting bolts (2).
  11. Using care. Remove the radiator cooling fan assembly (3) from vehicle.
    Fig 3: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts
    GC0144322Courtesy of CHRYSLER LLC
  12. Removing the fan motor wiring harness (5) from the fan shroud (6).
  13. Remove the fan blade (4) from the fan motor.
  14. Remove the bolts (2) that support the fan motor to the shroud.
scientia non olet · About LEMON Manuals