5.7L Dual Fan

Fig 1: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts

Courtesy of CHRYSLER LLC

Install the fan blade (4) to the fan motor. Tighten the nut (3) to 6 N.m (50 in. lbs.).
Position the fan motor assembly to the shroud (6).
Install the bolts (2) that support the fan motor to the shroud. Tighten the nut (3) to 6 N.m (50 in. lbs.).
Route the fan motor wiring harness (5) through the fan shroud (6).

Fig 2: Fan & Lower Radiator Mounts
Courtesy of CHRYSLER LLC
Position radiator cooling fan assembly (1) in vehicle.
Guide the fan (1) into the lower radiator mounts (2).

Fig 3: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER LLC
Install cooling fan mounting bolts (2). Tighten to 6 N.m (50 in. lbs.)
Connect cooling fan electrical connector (1).

Fig 4: Upper Radiator Hose
Courtesy of CHRYSLER LLC
Install the upper radiator hose.
Install the air filter housing. Refer to BODY, Air Cleaner, Installation, 3.6L or BODY, Air Cleaner, Installation, 5.7L .
Fill the cooling system. Refer to Standard Procedure .
Operate engine until it reaches normal operating temperature.