LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Standard Procedure - Module Programming >> Programming The Win

Programming The Win

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Read all notes and cautions for programming procedures.

  1. Connect a battery charger to the vehicle.
  2. Connect the scan tool.
    NOTE:

    Have a unique vehicle PIN readily available before running the routine

    CAUTION:

    If the PCM and WIN are replaced at the same time, the PCM MUST be programmed before the WIN.

  3. Select "ECU View".
  4. Select "WIN".
  5. Select "Miscellaneous Functions".
  6. Select "WIN Replaced".
  7. Enter the PIN when prompted.
  8. Cycle ignition key after the successful routine completion.
NOTE:

If the PCM and the WIN are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new WIN.

scientia non olet · About LEMON Manuals