LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Standard Procedure - Module Programming >> Pcm/Win Programming

Pcm/Win Programming

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When an PCM and the WIN are replaced at the same time, perform the following steps in order:

  1. Program the new WIN.
  2. Replace all ignition keys and program them to the new WIN.
scientia non olet · About LEMON Manuals