MODULE, Heated Seat: Operation: Operation

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Heated Seat Module (HSM) is used to control the functions of the following systems:

Vented Seats - Two vented seats can be controlled by the HSM, refer to Operation .
Heated Seats - Up to four heated seats can be controlled by the HSM, refer to Operation .
Heated Steering Wheel . Refer to Operation .

NOTE:

The HSM will configure itself depending on what components are installed on the vehicle. This allows for one module to be used for every component combinations available.

The HSM will only be on with the engine running. Therefore the heated seats, vented seats, and heated steering wheel will only operate with the engine running. Seat heating and seat venting are independent systems; however, they can not be actuated at the same time. Turning the vented seats on when the heated seat are already on will turn off the heated seats and vice versa. The heated steering wheel on the other hand can be on at the same time as either the heated seats or the cooled seats.