LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Pcm, Win, FOBIKS Module/Programming Order Replacement Guide

Pcm, Win, FOBIKS Module/Programming Order Replacement Guide

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Match the module row with the condition that applies, after module replacement follow the chart down and program the modules in the chart order.

Module MODULE REPLACEMENT GUIDE (PCM, WIN, FOBiKs)
Condition 1 Condition 2 Condition 3 Condition 4 Condition 5 Condition 6 Condition 7
PCM Existing New Existing Existing New New New
WCM/WIN (and ELV/ESCL if equipped) Existing Existing New New Existing New New
FOBiKs New Existing Existing New New Existing New
PROGRAMMING ORDER ASSOCIATED MODULE MISC. FUNCTION
1 Program Ignition Keys or Key FOBs PCM Replaced WIN Replaced WIN Replaced PCM Replaced Attempt to avoid this situation. If possible, try to execute condition 2 or 3. Otherwise, keys must be replaced also (Condition 7). Check PCM VIN
2 ---- ---- Program Ignition Keys or Key FOBs Program Ignition Keys or Key FOBs Program Ignition Keys or Key FOBs WIN Replaced
3 ---- ---- ELV/ESCL Replaced (if ELV/ESCL equipped) (ignition ON) ELV/ESCL Replaced (if ELV/ESCL equipped) (ignition ON) ---- Program Ignition Keys or Key FOBs
4 ---- ---- ---- ---- ---- ELV/ESCL Replaced (if ELV/ESCL equipped) (ignition ON)