SOLENOID, Variable Valve Timing: Removal: Right

Fig 1: Variable Valve Timing Solenoid Connectors, Valve Timing Solenoid, Valve Timing Solenoid & Bolts

Courtesy of CHRYSLER LLC

Disconnect and isolate the negative battery cable.
NOTE:
Mark the variable valve timing solenoid connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Mark the intake variable valve timing solenoid (2) and the exhaust variable valve timing solenoid (4) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Disconnect the electrical connector (1) from the variable valve timing solenoid.
Remove the variable valve timing solenoid mounting bolts (3).

Fig 2: Seal
Courtesy of CHRYSLER LLC
Pull the variable valve timing solenoid from the cylinder head cover.
The seal (1) can be reused if not damaged.