COIL, Ignition: Removal: 3.6L

Fig 1: Negative Battery Cable

Courtesy of CHRYSLER LLC

Disconnect and isolate the negative battery cable (1).

Fig 2: Engine Cover
Courtesy of CHRYSLER LLC
Lift the engine cover retaining grommets off the ball studs and remove the engine cover (1).

Fig 3: Air Inlet Hose
Courtesy of CHRYSLER LLC
If removing the ignition coils from cylinders 1, 3 or 5 on the right side of the engine, first remove the air inlet hose (5). Refer to BODY, Air Cleaner, Removal, 3.6L or BODY, Air Cleaner, Removal, 5.7L .

Fig 4: Upper Intake Manifold
Courtesy of CHRYSLER LLC
If removing the ignition coils from cylinders 2, 4 or 6 on the left side of the engine, first remove the air inlet hose, upper intake manifold (2) and insulator. Refer to MANIFOLD, Intake, Removal, 3.6L or MANIFOLD, Intake, Removal, 5.7L .

Fig 5: Electrical Connector, Ignition Coil Retaining Bolt & Ignition Coil
Courtesy of CHRYSLER LLC

NOTE:
The left side ignition coils are shown in illustration, the right side ignition coils are similar.
Unlock and disconnect the electrical connector (1) from the ignition coil.
Remove the ignition coil retaining bolt (3).
Pull the ignition coil (2) from cylinder head cover opening with a slight twisting action.