LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Installation >> 2.0, 2.4L Front

2.0, 2.4L Front

Fig 1: Cam Sensor
GC0082375Courtesy of CHRYSLER LLC
CAUTION:

Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do not drive CMP sensor into the bore with mounting screw. This may cause CMP sensor to be incorrectly seated causing a faulty signal or no signal at all.

  1. Lubricate sensor O-ring.
    Fig 2: Front Cam Sensor
    GC0082374Courtesy of CHRYSLER LLC
  2. Install CMP sensor and mounting bolt and tighten to 9 N.m (79.5 in. lbs.).
  3. Connect electrical connector to camshaft position sensor.
  4. Install the negative battery cable.
  5. Install the air cleaner to throttle body hose, connect the inlet air temperature sensor electrical connector.
scientia non olet · About LEMON Manuals