LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 Limited, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission >> DTC Troubleshooting >> P083B-LC Pressure Switch Rationality >> Set Condition:

Set Condition:

The DTC is set if one of the pressure switches are open or closed at the wrong time in a given gear. If the problem is identified for 3 successive key starts, the transmission will go into Limp-in mode and the MIL will turn on after 10 seconds of vehicle operation.

scientia non olet · About LEMON Manuals