LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 LX, 3.6 G >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Air Injection >> Valve, One Way Check >> Removal >> Removal

Valve, One Way Check: Removal: Removal

Fig 1: Quick Connect Fitting
GC0147164Courtesy of CHRYSLER LLC
WARNING:

THE EXHAUST MANIFOLD, AIR INJECTION PIPES, EXHAUST PIPES AND CATALYTIC CONVERTER(S) BECOME VERY HOT DURING ENGINE OPERATION. ALLOW ENGINE TO COOL BEFORE REMOVING AIR INJECTION CHECK VALVE. FAILURE TO ALLOW ENGINE TO COOL BEFORE REMOVAL MAY RESULT IN PERSONAL INJURY CAUSED BY BURNS.

  1. Remove the engine cover.
  2. To release the connecting tube from the one way check valve, squeeze the quick connect fitting as shown in illustration.
    Fig 2: Air Injection Check Valve
    GC0099922Courtesy of CHRYSLER LLC
  3. Disconnect and remove the connecting tube (3) from the one way check valve (1).
  4. Remove the check valve mounting bolts (4).
  5. Remove the one way check valve (1) and gasket (5) from the exhaust manifold flange. Remove residual gasket material from the flange.
scientia non olet · About LEMON Manuals