FAN, Cooling: Installation: Installation
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RADIATOR FAN ELECTRICAL CONNECTOR |
| 2 - BRACKET |
| 3 - RADIATOR |
- Install the radiator fan assembly into J-clips.
- Install radiator fan fasteners. Tighten all radiator fan retaining screws to 6 N.m (55 in. lbs.).
- Install radiator crossmember. Refer to Body/Exterior/PANEL, Closure - Installation .
- Install wiring harness bracket (2).
- Connect radiator fan electrical connector (1).
- Install upper radiator hose.
- Connect negative battery cable.
- Fill cooling system. See Cooling - Standard Procedure .