LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> PT Cruiser >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Power Door Lock System (Service Information)) >> Standard Procedure >> Double Activation Unlock >> Customer Programming

Customer Programming

WARNING: This page is about a different car, the 2009 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the driver door, sit in the driver seat, and close the driver door.
  2. Turn the ignition switch to the RUN position (without starting the vehicle) and then back to OFF. Repeat this step three additional times (for a total of four key ON/OFF cycles).
  3. Within 10 seconds of switching the ignition switch to the OFF position for the last time (at the end of the fourth cycle in the above step), press the driver interior door lock switch to UNLOCK.
  4. A single chime will be heard to verify that the customer programmable toggle of the double activation unlock was successfully completed.

Steps 2 and 3 must be completed within 10 seconds.

scientia non olet · About LEMON Manuals