WHEEL, Steering: Installation: Installation

Fig 1: STEERING WHEEL REMOVAL & INSTALLATION

Courtesy of CHRYSLER LLC

Align the spline on the steering wheel hub to the column shaft, then install the steering wheel (1).
Install a NEW retainer bolt (2). Tighten the bolt to 70 N.m (52 ft. lbs.).

Fig 2: DRIVER AIRBAG REMOVAL & INSTALLATION
Courtesy of CHRYSLER LLC
Install the airbag (3). Refer to Restraints/AIR BAG, Driver - Installation
Install the negative battery terminal on the battery. It is important that this is performed properly (including calibration of steering angle sensor if equipped with ESC). Refer to Electrical/Battery System - Standard Procedure
CAUTION: If the steering wheel is excessively off-center while driving, outside of Chassis specifications, inadvertent ESC activations may occur on a vehicle so equipped.
Test the operation of the horn, lights and any other functions that are steering column operated.