LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> 300 C, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> SENSOR, Knock >> Removal >> 3.5L

SENSOR, Knock: Removal: 3.5L

Fig 1: KNOCK SENSOR CONNECTOR
GC0080082Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the upper intake manifold. Refer to Engine/Manifolds/MANIFOLD, Intake - Removal
  3. Disconnect the electrical connector.
    Fig 2: KNOCK SENSOR LOCATION
    GC0095241Courtesy of CHRYSLER LLC
  4. Remove the knock sensor.
scientia non olet · About LEMON Manuals