LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> 300 C, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition >> Installation >> 6.1L

COIL, Ignition: Installation: 6.1L

Fig 1: IGNITION COIL REMOVAL - 6.1L
GC0080076Courtesy of CHRYSLER LLC
  1. Before installing coil(s), apply dielectric grease to inside of spark plug boots (1).
    Fig 2: IGNITION COIL MOUNTING BOLTS - 6.1L
    GC0080075Courtesy of CHRYSLER LLC
  2. Position ignition coil into valve cover and push both spark plug boots onto each spark plug.
  3. Install two coil mounting bolts (3) and tighten to 12 N.m (106 in. lbs.).
  4. Connect electrical connector (1) to coil and lock connector.
  5. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals