LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Town & Country Limited >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Spark Plug >> Installation >> 4.0L

Spark Plug: Installation: 4.0L

Fig 1: Removing/Installing Ignition Coil Assembly
GC0082157Courtesy of CHRYSLER LLC
CAUTION: Start each spark plug by hand to avoid cross threading and plug damage, use a quality socket with a rubber insert and start each spark plug into the cylinder head by hand.
  1. Tighten spark plugs to 27 N.m (20 ft. lbs.).
  2. Install ignition coil (3) and bolt (2).
  3. Tighten bolt to 8 N.m (71 in. lbs.).
  4. Connect electrical connector (1) to ignition coil (3).
  5. Install intake manifold. Refer to INSTALLATION .
  6. Install engine cover.
  7. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals