LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Touring, 2D Convertible, Gas >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Installation >> 2.0, 2.4L

2.0, 2.4L

Fig 1: Removing/Installing Ignition Capacitor - 2.0L/2.4L
GC0084713Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor (2) and bolt (3), tighten bolt to 10 N.m (88.5 ft. lbs.).
  2. Connect electrical connector (1).
  3. Connect the negative battery cable, tighten the nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals