LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring LX, 2D Convertible, ED3 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Removal >> 2.7L 2nd

2.7L 2nd

Fig 1: 2nd Ignition Capacitor - 2.7L
GC0080070Courtesy of CHRYSLER LLC

The ignition capacitor is located under the intake manifold on the drivers side of the engine.

  1. Disconnect and isolate negative battery cable at battery.
  2. Remove electrical connector (3).
  3. Remove mounting bolt (1) and ignition capacitor (2).
scientia non olet · About LEMON Manuals