LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, EDG >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Removal >> 2.7L

HEATER, Engine Block: Removal: 2.7L

Fig 1: Engine Block Heater - 2.7L
GC0120889Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
2 - ENGINE - RIGHT SIDE
  1. Raise vehicle on hoist.
  2. Detach power cord plug from block heater.
  3. Remove block heater attaching screw located below heater terminals.
  4. Remove block heater from cylinder block.
scientia non olet · About LEMON Manuals