LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, EDG >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> MODULE, Engine Control >> Standard Procedure >> ECM/Skim/WCM Programming - Diesel >> PROGRAMMING THE ECM (Bosch)

PROGRAMMING THE ECM (Bosch)

CAUTION: Read all notes and cautions for programming procedures.
  1. Connect a battery charger to the vehicle.
  2. Connect the StarSCAN®.
  3. Select "ECU View".
  4. Select "WCM Wireless Control Module".
  5. Select "Miscellaneous Functions".
  6. Select "PCM Replaced".
  7. Enter the PIN when prompted.
  8. Press "Next".
  9. Cycle the Key.
  10. Verify the repair.
scientia non olet · About LEMON Manuals