LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> (Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission) >> DTC Troubleshooting >> P0731-Gear Ratio Error In 1ST >> Possible Causes

Possible Causes

Possible Causes 
RELATED TRANSMISSION DTCS PRESENT
INPUT OR OUTPUT SPEED SENSOR ERRORS
LOW LINE PRESSURE
FAILED UD OR LR CLUTCH
CUT OR TORN UD OR LR CLUTCH PISTON SEAL
CUT UD OR LR ACCUMULATOR PISTON SEAL
STUCK MAIN REGULATOR VALVE
SOLENOID MODULE
BROKEN INPUT SHAFT
FAILED UD SHAFT
FAILED REAR SUN GEAR, CARRIER, OR ANNULUS GEAR

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure  .