Set Conditions

• Set Condition: 

  DTC will set when the transmission temperature does not reach a normal operating temperature within a given time frame. Time is variable due to ambient temperature. Approximate DTC set time is 10 to 35 minutes.

  The following are starting temperature to warm up times to set this DTC:

• Starting temperature -40°C (-40°F) warm up time 35 minutes.

• Starting temperature -28°C (-20°F) 25 minutes.

• Starting temperature -6.6°C (20°F) 20 minutes.

• Starting temperature 15.5°C (60°F) 10 minutes.

When the fault is set, calculated temperature is substituted for measured temperature, however the DTC is stored only after three consecutive occurrences.