LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> (Automatic Transmission Control Module (TCM) - Electrical Diagnostics) >> DTC Troubleshooting >> P2837-Shift Fork 2 Position Circuit Range/Performance >> Diagnostic Test

Diagnostic Test

  1. CHECK THE TRANSMISSION CONTROL MODULE 

    Repair 

    • Using the schematics as a guide, check the Transmission Control Module (TCM) terminals and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. Check for any Service Bulletins for possible causes that may apply. If no problems are found, replace and program the Transmission Control Module Assembly (TCMA) in accordance with the Service Information.
    • Perform the MPS6 VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure .
scientia non olet · About LEMON Manuals