LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Removal >> Diesel Engine

Diesel Engine

NOTE: Before proceeding. See Steering - Warning .
  1. Siphon as much fluid as possible from the power steering fluid reservoir.
  2. Remove the engine appearance cover.
    Fig 1: PRESSURE LINE
    GC0082522Courtesy of CHRYSLER LLC
  3. Remove the pressure hose routing bracket bolt (2) to the upper mount (7).
  4. Remove the pressure hose (3) at the pump pressure port (4).
    Fig 2: SUPPLY HOSE
    GC0082523Courtesy of CHRYSLER LLC
  5. Remove the hose clamp (3) securing the supply hose (1) at the pump.
  6. Remove the supply hose (1) from the pump (2).
    Fig 3: POWER STEERING PUMP - DIESEL
    GC0082524Courtesy of CHRYSLER LLC
  7. Remove the drive belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal
  8. Remove the two pump mounting bolts (1) through the pulley (2) openings.
    Fig 4: THIRD MOUNTING BOLT - DIESEL
    GC0082525Courtesy of CHRYSLER LLC
  9. Remove the rear pump mounting bolt (2) behind the pump (1).
  10. Remove the power steering pump (1).
scientia non olet · About LEMON Manuals