LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems (Service Information) >> MODULE, Occupant Restraint Controller >> Removal >> Occupant Restraint Controller

Occupant Restraint Controller

Fig 1: Removing/Installing ORC Module
GC0122055Courtesy of CHRYSLER LLC
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.
  3. Remove the center console. Refer to Body/Interior/HOUSING, Shifter - Removal .
  4. Remove the ORC mounting nuts (2).
  5. Disconnect the two ORC connectors (4 and 5).
  6. Remove ORC (3) from vehicle.
scientia non olet · About LEMON Manuals