LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems (Service Information) >> MODULE, Occupant Restraint Controller >> Installation >> Orc Jumper Harness

Orc Jumper Harness

Fig 1: Removing/Installing ORC Module Jumper Harness
GC0122056Courtesy of CHRYSLER LLC
  1. Connect the ORC jumper harness (2) to the body harness (3).
  2. Connect the ORC jumper harness connector (4) to the ORC (1).
  3. Install the center console. Refer to Body/Interior/HOUSING, Shifter - Installation .
    WARNING: Do not connect the battery negative cable. See Restraints - Diagnosis and Testing . Serious or fatal injury may result if the system test is not performed first.
scientia non olet · About LEMON Manuals