LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems (Service Information) >> MODULE, Occupant Restraint Controller >> Installation >> Occupant Restraint Controller

Occupant Restraint Controller

Fig 1: Removing/Installing ORC Module
GC0122055Courtesy of CHRYSLER LLC
  1. Connect the two ORC connectors (4 and 5) and ensure that the connectors are engaged.
  2. Position ORC (3) (arrow pointing forward) on the console floor bracket and mounting studs (1).
  3. Install the three ORC retaining nuts (2) and tighten to 9 N.m (79.5 in. lbs.).
  4. Install the center console. Refer to Body/Interior/HOUSING, Shifter - Installation .
    WARNING: Do not connect the battery negative cable. See Restraints - Diagnosis and Testing . Serious or fatal injury may result if the system test is not performed first.
scientia non olet · About LEMON Manuals