Diagnostic Test
- See DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Diagnosis and Testing and perform the appropriate diagnostic procedure.
- CHECK FOR SQUIB RELATED DTCS
- Turn the ignition on.
- With the scan tool, read the Occupant Restraint Controller (ORC) DTCs.
Is there any squib related DTCs present?
Yes
- Diagnose specified squib DTCs before diagnosing this DTC.
No
- Replace the ORC in accordance with the Service Information.
- Perform the OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST. See DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure .
WARNING: Turn the ignition off, disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.