LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Ignition Control (Service Information)) >> COIL, Ignition >> Installation >> 2.7L

COIL, Ignition: Installation: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Electrical Connectors And Mounting Bolts At Ignition Coil
GC0121029Courtesy of CHRYSLER LLC
  1. Align ignition coil with top of spark plug.
  2. Twist and push down ignition coil assembly onto spark plug and valve cover. Install mounting bolt (2) and tighten to 7.5 N.m (65 in. lbs.).
  3. Connect electrical connector (1) to ignition coil.
  4. Install upper intake manifold. Refer to INSTALLATION .
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals