LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Ignition Control (Service Information)) >> CAPACITOR, Ignition >> Removal >> 3.5L

CAPACITOR, Ignition: Removal: 3.5L

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 08 CS 4.0L IGN CAPACITOR
GC0080071Courtesy of CHRYSLER LLC

The ignition capacitor is located on the drivers side of the engine.

  1. Disconnect and isolate negative battery cable at battery.
  2. Remove electrical connector (3).
  3. Remove mounting bolt (1) and ignition capacitor (2).
scientia non olet · About LEMON Manuals