LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Ignition Control (Service Information)) >> CAPACITOR, Ignition >> Installation >> 2.7L 1st

2.7L 1st

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IGNITION COIL CAPACITOR - 2.7L
GC0080069Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor and nut.
  2. Tighten nut to 10 N.m (88.5 in. lbs.).
  3. Attach electrical connector to capacitor.
  4. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals