LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Ignition Control (Service Information)) >> CAPACITOR, Ignition >> Installation >> 2.0, 2.4L

2.0, 2.4L

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IGNITION CAPACITOR
GC0084713Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor (2) and bolt (3), tighten bolt to 10 N.m (88.5 ft. lbs.).
  2. Connect electrical connector (1).
  3. Connect the negative battery cable, tighten the nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals